HLG-120H-24 Vivotek 120W Single Output Switching Power Supply 24VDC

Specifications

Output

• DC Voltage - 24V
• Constant Current Region - 12 ~ 24V
• Rated Current - 5A
• Rated Power - 120W
• Ripple & Noise (Max.) - 150mVp-p
• Voltage Adj. Range - 22 ~ 27V
• Current Adj. Range
  • Can be adjusted by internal potentiometer A type only
  • 2.5 ~ 5A
• Voltage Tolerance - 1.0%
• Line Regulation - 0.5%
• Load Regulation - 0.5%
• Setup,Rise Time - 1200ms,50ms/115VAC 500ms,50ms/230VAC at full load ; B type 1200ms,200ms/115VAC 500ms,200ms/230VAC at 95% load
• Hold Up Time (Typ.) - 12ms at full load 230VAC / 115VAC

Input

• Voltage Range - 90 ~ 305VAC, 127 ~ 431VDC
• Frequency Range - 47 ~ 63Hz
• Power Factor (Typ.) - PF>0.98/115VAC, PF>0.95/230VAC, PF>0.93/277VAC at full load (Please refer to "Power Factor Characteristic" curve)
• Total Harmonic Distortion - THD< 20% when output loading50% at 115VAC/230VAC input and output loading75% at 277VAC input
• Efficiency (Typ.) - 93%
• Ac Current (Typ.) - 1.4A / 115VAC, 0.6A / 230VAC, 0.55A / 277VAC
• Inrush Current (Typ.) - COLD START 60A(twidth=375μs measured at 50% Ipeak) at 230VAC
• Max. No. Of Psus On 16A Circuit Breaker - 5 units (circuit breaker of type B) / 9 units (circuit breaker of type C) at 230VAC
• Leakage Current - <0.75mA / 277VAC

Protection

• Over Current
  • 95 ~ 108%
  • Protection type : Constant current limiting, recovers automatically after fault condition is removed
• Short Circuit - Constant current limiting, recovers automatically after fault condition is removed
• Over Voltage
  • 28 ~ 34V
  • Protection type : Shut down o/p voltage with auto-recovery or re-power on to recovery
• Over Temperature - Shut down o/p voltage, recovers automatically after temperature goes down

Environment

• Working Temp. - -40 ~ +70™C(Refer to "Derating Curve")
• Working Humidity - 20 ~ 95% RH non-condensing
• Storage Temp., Humidity - -40 ~ +80™C, 10 ~ 95% RH
• Temp. Coefficient - ™0.03%/™C(0 ~ 50™C)
• Vibration - 10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes

Safety & EMC

• Safety Standards - UL8750, CSA C22.2 No. 250.0-08, ENEC, TUV EN61347-1, EN61347-2-13 independent IP65 or IP67, J61347-1, J61347-2-13 approved ; design refer to UL60950-1, TUV EN60950-1
• Withstand Voltage - I/P-O/P:3.75KVAC I/P-FG:2KVAC O/P-FG:1.5KVAC
• Isolation Resistance - I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25™C/ 70% RH
• EMC Emission - Compliance to EN55015, EN55022 (CISPR22) Class B, EN61000-3-2 Class C (50% load) ; EN61000-3-3
• EMC Immunity - Compliance to EN61000-4-2,3,4,5,6,8,11, EN61547, EN55024, light industry level (surge 4KV), criteria A

Others

• MTBF - 192.2K hrs min. MIL-HDBK-217F (25™C)
• Dimension - 220*68*38.8mm (L*W*H)
• Packing - 1.12Kg; 12pcs/14.4Kg/0.8CUFT

HLG-120H-24 Specifications PDF