PXB-200HF TAKEX 660' /1320' Intelligent Double Modulated Quad Beam,Selectable Relay Output N/O N/C Relay, 12 to 30VDC

Model Number: PXB-200HF

TAKEX 660' /1320' Intelligent Double Modulated Quad Beam,Selectable Relay Output N/O N/C Relay, 12 to 30VDC

• Detection System - Quad, Active Infrared Beam
• Wavelength - 940nm
• Modulation - Double Pulse Modulation
• Protection Distance Outdoors - 200m (660ft.)
• Protection Distance Indoors - 400m (1320ft.)
• Signal Arrival Distance - 2000M (6600ft.)
• Response Time - 0.05 sec. to 0.7 sec.
• Frequency Selection - 4 Channels
• Environmental Output - Dry contact relay output Form C. Action: Activated when weather condition gets worse. Contact action: Interruption time (Min. 2 sec.). Contact capacity: 30V (AC/DC) 1A (resistor load) Protective resistor.
• Alarm Output - Dry contact relay output Form C Contact action: Interruption time (min. 2 sec.) Contact capacity: 30V (AC/DC) 1A (resistive load)Protective resistor.
• Tamper Output - Dry contact relay (N.C.) Action: Activated when cover is detached. Contact capacity: 30V (AC/DC) 0.1A (resistor load) Protective resistor.
• Contact Rating - 30VAC/DC 1.0A Max.
• Alarm Led Red - On at Alarm
• Alarm Memory Led Red:
  • Pulsing at Alarm
  • Manual Reset: By Auxilliary Switch
  • Auto Reset:55 to 60mins.
• Sensitivity Attenuation Led Red - On when beam is attenuated
• Lens Adjustment - Horizontal: ±90°, Vertical: ±20°
• Supply Power - 12 to 30VDC ( non polarity)
• Current Consumption: - 34mA or less per set (set of Transmitter & Receiver)
• Ambient Temperature - -31F° to +151°F (-35°C to + 66°C)
• Accessories - Pole attachment, Anti-Bird spike, Screws, Instruction manual
• Installation - Wall or Pole mounting
• Wiring - Terminals
• Weight - Transmitter: 3.06LBS (49OZ), Receiver: 3.2LBS (51OZ)
• External Appearance - PC resin (wine red)