PXB-100ATC TAKEX Anti-Crawl Photoelectric Beam Sensor

Model Number: PXB-100ATC

TAKEX Anti-Crawl Photoelectric Beam Sensor

TAKEX PXB-100ATC photoelectric beam sensors were developed for high-risk applications where detection of all intrusion attempts is critical. The PXB-100ATC uses a unique synchronized timing system to achieve unrivalled detection performance and versatility.

The modular design of the PXB-100ATC sensors ensures that systems can be implemented based on the needs of the application and environment. Sensors can be integrated in a ‘tower’ configuration to create a high security detection zone of 100m outdoors, to a height of over 8m.

Specifications

• Product type - Photoelectric Beam Sensor
• Detection system - Near infrared beam interruption system (4 beams simultaneous interruption or upper/lower 2 beams interruption)
• Infrared beam - Double modulation pulsed beam by infrared LED
• Protection distance
  • Outdoor 100m (330ft) or less
  • Indoor 200m (660ft) or less
• Max. beam range
  • Outdoor 1000m (3300ft) or less
  • Indoor 1000m (3300ft) or less
• Response time
  • OR gated : upper 2 beams and lower 2 beams simultaneous interruption 0.05sec
  • Upper 2 beams interruption or lower 2 beams interruption : 0.1/0.2/0.3/0.5 sec. (selectable)
  • AND gated : upper 2 beams and lower 2 beams simultaneous interruption 0.05sec.
• Supply voltage - 12V to 30VDC (Non-polarity)
• Current consumption - Transmitter : 27mA / Receiver : 48mA
• Alarm output
  • Dry contact output : N/C or N/O selectable
  • Contact action : Interruption time (min. 2 sec)
  • Capacity : AC/DV30V 1A (resistive load) Protective resistor
• Environmental output
  • Dry contact output : N/C or N/O selectable
  • Action : activated when weather condition worsens
  • Capacity : AC/DC30V 1A (resistive load) Protective resistor
• Tamper output
  • Dry contact output : N/C
  • Action : activated when cover is detached
  • Capacity : AC/DC30V 0.1A (resistive load) Protective resistor
• Alarm LED - Red LED (only Receiver) ON : when an alarm is initiated
• Attenuation LED - Red LED (only Receiver) ON : when beam is attenuated
• Functions
  • Modulated beam frequency selection
  • Tone indicator
  • Environmental module
  • Beam power selection
  • Transmitting power adjustment
  • Programmed AGC
  • Synchro timing selection
  • Auto-gain lock function
  • Monitor jack
  • Tamper
  • Response time adjustment
  • Alarm output selection
  • Environment output selection
  • Upper / Lower beam switch
  • Wireless Alignmnet Checker connecting function
• Beam Adjustment - Horizontal : ±90° / Vertical : ±20°
• Ambient temperature range - -35°C to +66°C (-31°F to +151°F)
• Mounting positions - Outdoor, Indoor
• Wiring - Terminals
• Weight
  • Transmitter : 1400g (49oz)
  • Receiver : 1470g (51.5oz)
• Appearance - PC resin (wine red)
• Accessory - Pole attachment, Anti-bird spike, Screws, Instruction manual

PXB-100ATC Specifications PDF