VCS-8P2-MOB Veracity Camswitch 8 Mobile Powered Via 12V Dc Or 24V Dc

CAMSWITCH Mobile off ers the ideal network solution for transport,battery, solar and low-voltage applications..

Features

• 802.3af POE / 802.3at POE Plus compatible outputs
• Converts a wide input voltage range to POE levels
• Up to 80 watt power budget
• Auto-confi guring 10/100 Ethernet switch
• 4+1 and 8+2 channel models
• Rugged enclosure with adjustable mounting brackets

Specifications

Power Input

• Connector - Detachable screw terminal
• Voltage - 8.5 - 40V (minimum startup voltage is 10.5V, supports engine cranking and reduce overdischarge) DC only (contact Veracity for 24V AC applications)
• Fusing - The use of an external fuse is recommended. Rating: 5 amps for 24V DC or 10 amps for 12V DC supply, slow blow type

POE Outputs

• POE standard - IEEE 8023.af / IEEE 802.3at compatible Not isolated from DC input; for use in closed system transport applications;connected devices must be IEEE compliant Veracity enhanced POE supports maximum efficiency and range

Power Budget

• 24V input - 80 watts total camera power
• 12V input - 80 watts ( reduce to 65 watts for max 30ºC temperature rise above ambient )
• <12V input
• 60 watts ( reduce to 50 watts if voltage can drop below 10V )
• POE power conversion produces heat; the above limits are for horizontal mounting with ventilation
• Installation in enclosed spaces will cause additional heating and power limiting Warning: enclosure may become hot in operation

Ethernet Interface

• Connector - RJ45, 5-port unmanaged 10/100 switch
• Rates - 10BASE-T or 100BASE-T and duplex, auto-configuring for speed
• Cable - Straight through or crossover Cat 5, Cat 5e or Cat 6 patch VCS-8P2-MOB supports VLAN trunking

LED Indicators

• Green - POE Ports
  • Constant - POE enabled
  • Off - No POE requested
• Green - Non POE Ports
  • Constant - Power OK
  • Off - No power
• Yellow
  • Constant - Ethernet OK
  • Blink - Network activity

Physical/Environmental

• Dimensions - Dimensions L 110mm / 131mm with side clips W 100mm including connectors H 40mm
• Mounting (brackets inc.) - Mounting (brackets inc.) 5mm mounting holes on 122mm centres
• Weight - Weight 290g [10.2oz] (VCS-4P1-MOB) / 350g [12.3oz] (VCS-8P2-MOB)
• Operating temperature - Operating temperature -10oC to 50oC [14oF to 122oF]
• Relative humidity - Relative humidity Up to 85%, non-condensing
• Compliance - Compliance CE, FCC, RoHS

VCS-8P2-MOB Specifications PDF